Use the tufting gun to create your own custom rugs.
Electric carpet tufting gun, it is suitable for high speed weaving and flexible movement. We can use a tufting gun (usually used to make rugs) to make ornaments that can be hung on the wall. This process involves running individual threads through sheets of fabric to form shapes and patterns. Sometimes also makes rugs and other decorations to display at home.
Let’s get to the tufting！
>Here’s a step-by-step guide to carpet finishing. This assumes everything is set up and ready to go.
>Design your mat.
>Choose thread colors for the corresponding areas.
>Stretch your backing fabric over the frame as tight as possible.
>Mark your design on the backing fabric. We use a sharpie marker. Your rug is padded on the back of the rug so your design does not show through.
>Label the areas of the design with the appropriate thread colors. It helps when you choke.
>Tuft your carpet!
>Apply adhesive and back fabric, if desired. Backing fabric is not necessary unless you want to see the back of the rug. In many cases, you may never see this. For example, the inside of a cushion or a bag. A liner will cover this.
>Let it dry and finish your project.
>thread machine
Be careful when adjusting the cut hair machine. Improper machine settings will prevent the scissors from working. If the stack height is set too high, the scissors cannot work properly. Follow the online video guide for the correct settings. Never loosen or adjust the bolt below. This will prevent the scissors from working.
>Barrel Orientation
It is important to maintain the correct direction when using the tufting gun. Incorrect direction will cause tufting failure. Note the direction the foot is pointing. Significant pressure must be applied to the backing for the tufts to be pushed to the front of the mat. Watch our Quick Start Guide video for help.
>Interview
Machine maintenance is easy: 1. Add a drop of sewing machine oil to each linear bearing every week to keep the machine running smoothly. See picture below. 2. The clipping machine should have a drop of oil added to the scissor joint every month.
>NOTE for tufting gun
Before pressing the start switch, be sure to turn on the power switch first.
When threading the gun, always turn it off. It’s best to unplug the machine so you don’t accidentally turn it on. Never touch the moving parts of the machine when it is running.
Be careful when adjusting the cut hair machine. Improper machine settings will prevent the scissors from working. If the stack height is set too high, the scissors cannot work properly. Follow the online video guide for the correct settings.
Never loosen or adjust the bolt below. This will prevent the scissors from working.
Notice Please !
Electric Carpet Rug Guns, Carpet Weaving Knitting Machine, Gift for DIY, Knitting & Crochet Supplies with 10-40 Stitches/Sec (Adjustable) 100V-240V
1. 【2 IN 1 TUFTING GUN】—The Electric Rug Tufting Gun can manually switch between CUT pile/ LOOP pile,just need replaces the scissors.One machine with two functions, more economical. Pile height adjustable from 10-19 mm(Cut pile) , 5-14 mm(Loop pile).
2. 【DIY CARPETS TOOLS】—This electric tufting gun can not only make DIY cut and loop pile carpets by yourself, but also make kinds of cool artworks for decorative / practical.
3. 【SIGNIFICANT FEATURE】—Input Power: 70w; Power Supply: 110V-240V/50-60Hz;Motor speed: 9400rpm.
4. 【HIGH EFFICIENCY】—The speed of this rug gun can reach 10 – 40 stitches per second, which increases the production efficiency by 80 to 150 times, which saves more manpower and time than hand knitting.
5. 【WIDELY APPLICATION】—It is easy to operate, easy to master, long life, less trouble.The machine is portable ,it also produced a huge change in the traditional hand-made carpet,can weave many types of fancy,at the same time more efficient.
Name: 2 in 1 Electric tufting gun
Model: Cut pile,Loop pile
Voltage: AC 110-240V
Frequencyr: 50-60HZ
Power: 70W
Speed range: 10-40 stitches/sec(adjustable)
Pile high: 10-19mm/adjustable(Cut pile) 5-14 mm/adjustable(Loop Pile)
Output DC；24V small adapter
Machine weight: 3 lbs
Safe protection: Has over-voltage, over-current and short circuit protection
1. We can uses a 2 in 1 tufting gun (usually used to make carpets) to make ornaments that can be hung on the wall. This process involves passing individual yarns through fabric sheets to form shapes and designs. Sometimes also makes carpets and other decorations for display at home.
2. 2 in 1Tufting Gun, It is suitable for high-speed weaving and flexible movement. It is suitable for mobile station work and can weave many types of fancy. Its production efficiency is Manual. 80-150 times of production, it is a new type of special equipment.
It is easy to operate, easy to master, long life, less trouble, and easy to adjust. It is one of the advanced special equipment that the carpet industry is indispensable for modern production.
3. Cut Pile
The pile surface structure of the cut pile carpet is pile-like, the pile surface is fine, the touch is soft, the short pile carpet has good durability, is easy to walk, and has strong practicability.
4. Loop pile
The loop pile carpet is neat and uniform, the surface hardness of the carpet is moderate and smooth, it is comfortable to walk, good abrasion resistance, easy to clean, suitable for laying in places with a lot of walking.
5. Feature
Portable type, moveable & flexible
Simple operation, Easy to master
High-speed tufting, High efficiency
Exquisite structure, Easy to be repaired
Hand-tufted, Precision work
Package include:
1 x 2 in 1Pink Electric Tufting Gun
1 x Adaptor
SPECIFICATIONS
- Brand Name: NoEnName_Null
- Origin: Mainland China
- Model Number: Tufting Gun
- Usage: Home DIY
- Certification: CE
- Type: Coil Nail Gun
- Power Source: Electricity
- Feture: 2022 NEW
- Feture 2: 2 IN 1 Can Do Both Cut Pile and Loop Pile
- Type: Electric Carpet Tufting Gun
- Specification: EU/US/UK PLUG
- Voltage: 110V-240V
- Christmas Gift: Carpet Weaving Flocking Machines
- Model Number: Cut pile;Loop pile
- Product name: 2 in 1 Electric tufting gun
- Frequency: 50-60HZ
- Power: 70W
- Speed range: 5-40 stitches/sec(adjustable)
- Pile high: 7-19mm/adjustable(Cut pile) 4-14 mm/adjustable(Loop Pile)
- Output DC: 24V small adapter
Reviews
There are no reviews yet.